Insulation Guides & News | Advice From The Experts | Insulation4Less

How to check up on your already existing home insulation

Insulation is crucial to ensuring that one’s home remains energy efficient when it is cool outside. Winters can be very cold and it is very important to get the insulation right. With the right amount of insulation, one can be assured of warmth being retained in the home despite severe cold outside. And with this, the home can be energy efficient, which is not only good for the individual in terms of capital expenditure, but also good for the environment. Without proper insulation done in the house, the energy present in the house might escape through the ceiling or the attic etc resulting in an extra amount of energy being required to keep the house cool.

The most recent expansion to the organization's "5000" range extend, Celotex CF5000 conveys a U-value inside the mass of 0.18 W/m²K without the need to enlarge the cavity.

Cavity insulation development remains the UK's most regular form strategy, with 70% of 27.4 million homes worked with cavity insulation. While indicating superior protection for cavity divider extends today, assembling experts must strike a harmony between execution, expense, and consistence whilst meeting the prerequisites of Building Regulations.

Celotex CF5000 is a premium execution full fill cavity insulation arrangement and is BBA confirmed. Making utilization of the entire cavity width, CF5000 streamlines the warm execution through the insulation and such, accomplishes lower U-values without the necessity to broaden the cavity, enhancing your home heat retention's effectiveness.

Always examine the state of the external window frames which are great indicators of the state of the house. Check for rotten window frames and any condensation between double-glazed windows which indicate faults and poor insulation. The roof of the house should also be examined as many old homes have roofs which have leaks or cracks and are not properly sealed. Always examine for damp staining, discolorations or any indications of leaks. Next, always check the plumbing g of the house. Check the water pressure in the taps and see if the pipes are insulators. Many old homes also have old radiators, boilers and water tanks which may need to be replaced very soon.

How warm houses change lives

Home insulation is one of the best measures one can take in order to increase energy efficiency and on the other hand, it aids in reducing your monthly utility bills. It is also to bound to make your house warmer, much more comfortable and at the same time reduce its impact on the environment as the process of home insulation is carried out.

Home insulation though mostly associated with providing protection in cold weather works as a barrier for both the seasons-the very hot times and the cold stretches. In the summer time, knauf insulation acts as a barrier and thus does not allow for hot air to enter and the cold air to escape; similarly, in the winter time it traps the hot air in the environment of the house, allowing for the house to say cozy.

Moreover, cheap insulation is low cost to the extent that typically it will pay for its cost in less than a period of five years due to the savings made in the area of energy. Knauf insulation can also be beneficial as far as renting the house or the decision to sell is concerned; the rating that your home receives on an Energy Performance Certificate (EPC) will be improved automatically driving up the rent amount or the price of the house.

Many people still prefer to live in their ancestral homes rather than modern and new buildings or houses; though the architecture may be desirable, old cottages can pose the problem of regulating temperature so insulation is typically the answer to combat the issue. Talking of insulation for a cottage, it would require a through and through approach covering wall insulation, floor insulation, attic insulation as well as cavity wall insulation if there is a need.

To make an old dwelling place comfortable enough to live in during the time of extreme temperatures, a suitable choice needs to be made in terms of the insulation materials used. Certain factors need to be considered before working on wall insulation or floor insulation of an old building. The environment and general weather of the region plays a big role as this will point one in the right direction in terms of moisture content and other concerns. The performance of the insulation material plays a big role here since it is inclusive of the R-value, vapor penetrability, and air permeability. Another factor to be taken into account would be the material characteristics such as recyclability, production, extraction, hazardous components and so on. Many individuals and companies now prefer bio-based insulation which is completely natural and made from plants, animals, and other renewable resources.

If you have not insulated your roof and rafters, they are costing you a lot of money in the form of energy bills for every minute that you are using the heating system. This is not an ideal situation to prevent heat loss and save money as heat will escape through the roof and rafters. And a considerable temperature difference will be created because it is a known fact that hot air rises, and in an uninsulated roof, all the heat is bound to escape through the roof eventually. The insulation of roof and rafters is not an expensive procedure and neither a difficult one at that. There are several insulation options available to choose from.

Celotex insulation is one of the options available for the insulation of your roof. This is especially needed in the case of pitched roofs where much heat is lost because of the void. This space can be made habitable by insulating along the plane of the roof pitch with Celotex insulation; to create a warm roof structure with Celotex insulation, it can be used over the roof structure to work as insulating sarking. It eradicates the issue of thermal bridges at the rafters whilst the foil facings, used in conjunction with taped joints, provide an effective barrier to moisture vapour and air leakage. The Celotex TB4000 is a multi-purpose insulation board developed to provide simple solutions for overcoming localised thermal bridges. Celotex TB4000 is made by using rigid polyisocyanurate (PIR) which contains a combination of blowing agents that have zero ozone depletion potential (zero ODP) and minimal global warming potential (GWP). When you choose Celotex TB4000 you are specifically aiming insulation for the elimination of thermal bridges; it is available in varying thickness other than the commonly used standard size, is conveniently cut and shaped for fitting purposes, includes low emissivity foil facings giving improved thermal insulation performance within cavity air spaces and the chief advantage of all- it is a method for the long-term provision of reliable energy saving for structures.

Internal wall insulation can have a very big impact on the heating bills however it is also a process which requires careful consideration before you decide on the installation. Since internal wall insulation can be quite a disruptive experience where items such as radiators, switches and kitchen fittings may have to be removed, it is best to carry out the process when you are building a new house; wall insulation or home insulation of any kind for that matter, this can get bothersome once you start the installation for an old house. As the idea for wall insulation is to create a layer which is air tight, it is important that areas or awkward spaces such as floor voids or unfinished areas be handled properly.

Knauf insulation is a company offering all kind of home insulation solutions. Amongst the options available for internal wall insulation and for partitions are:

Insulation is most necessary addition to the comfort and thermal efficiency of your home. There are a number of commonly used types of insulation found in commercial and residential buildings today. Without it you would consume endless amounts of energy to heat and cool your house, and this, as we all know, costs a lot of money. The reason for the many types of insulation is due to the different R-value of each variety.

Home owners who understand the necessity of insulating are always on the quest of the right insulation product. They understand that a complete insulation saves from various overhead costs. Cold walls aren't suitable neither for summer nor winter. They reduce the comfort area of a house and creates a chilling temperature. Insulated walls, on the other hand, means warmer walls. They maintain more healthful temperature within the house and is essential for seasonal comfort, family health, and fuel economy.